Skip Ribbon Commands
Skip to main content
FOLLOW:

FAQ's

 

 Effective SEPT 2005, a Fire Code Permit shall be required for a variety of activities including: construction, operations, plan examinations, inspections of occupancies, and the use, storage and handling of certain hazardous materials.

The following information is provided to assist you in determining if you need a Fire Code Permit for your business and how to obtain one.

 

 

Who is required to have a Fire Code Permit?

How do I obtain a Fire Code Permit?

How much does a Fire Code Permit Cost?

When does a permit expire?

What conditions must a business comply with to be issued a permit?

Why are Fire Code Permits required?

 

 

 

 

 

 

Any business that uses, stores, or manufactures regulated amounts of the hazardous materials, hazardous processes or a business “use” as identified by definitions listed under construction, operational or plan examination categories may require a permit.

 

 

An application and information can be obtained at the main office in the Township building or in PDF format by clicking under the related content section on this page.  The form can be downloaded, printed, mailed or delivered to the Fire Marshals Office. Please be sure to sign the application and include the required fee amount before submitting.

 

 

Fees vary depending upon the type and use of permit.  Fees are stated and defined under each type of permit category.

 

Most permits are good for one year and are renewed annually. Some permits such as: fireworks, blasting, tents, temporary structures or tank installations are issued for a limited time or a single event. When an annual permit is issued, the Fire Marshal's Office will conduct an annual inspection of the business to ensure conditions of the permit are met.

 

  • In order for a Fire Code Permit to be issued, the business must comply with the standards set forth under the International Fire Code and other referenced codes and standards. These include requirements under the Building Code, Electrical Code and other nationally recognized safety standards.
  • The amount and location of hazardous material must not exceed allowable amounts. These amounts are specified in the Fire Prevention Code in each chapter dealing with the specific type of hazardous material.
  • Fire protection equipment such as portable fire extinguishers, sprinkler systems, fire pumps, fire alarms and other safety equipment must be in good working order. In addition, all current test records for this equipment must be kept on site and available for review by the Inspector.
  • Electrical equipment must be installed and maintained in accordance with NFPA 70 (National Electrical Code).
  • Fire exits must be properly marked and maintained.
  • Emergency lights and emergency generators must be tested regularly to ensure proper operation.
  • Tanks used for flammable / combustible liquid or hazardous materials must be properly marked and labeled. Buildings used to store large amounts of hazardous or flammable material must be placarded with an approved NFPA 704 placard. An approved repository box must be installed on site. The repository box is used to store vital emergency information including Material Safety Data Sheets for chemicals on site and emergency contact information. An approved repository box is master keyed to allow access by responding Exeter Township Fire Department personnel only.
  • A permit is not transferable and any change in ownership, use, or occupancy of premises shall require a new permit.
  • Permits must be prominently displayed on the premises or immediately available for inspection.

Additional items may apply to your business, depending on the type of permit required. Questions regarding the technical requirements of the Fire Code Permit should be addressed to the Fire Marshal's Office (610) 779-4888.

 

 

The Fire Code provides a set of nationally recognized safety standards to ensure the safety of employees, business owners and the public. Due to their nature, hazardous materials, flammable and combustible liquids, explosives, compressed gases and other materials must be stored and handled in accordance with nationally recognized practices to reduce the risk to life and property. Permits also insure the proper design and installation of fire protection systems; exiting requirements, interior finish and building construction in new or renovated structures.
Permitting will occur in businesses that pose unique dangers to occupants and property such as places of assembly and educational facilities as well as those identified above. Permitting in conjunction with annual fire inspections will ensure that fire and life safety features are maintained to facilitate the safe and expedient evacuation of occupants in the event of an emergency.